MDSI CNC Software, General Motion Software, and Factory
      Automation SoftwareMDSI - The Total Manufacturing Solution
Products Customers/Testimonials Service/Support Contact Us About MDSI
CNC Controls General Motion Factory Automation Hardware
Our Customers Testimonials Press Releases MDSI In The Media - North America MDSI In The Media - Europe Machine Types
System Integrators - North America System Integrators - World-Wide Frequently Asked Questions (FAQ's)
North American Contacts South American Contacts European Contacts Asia Contacts Job Openings
Who We Are MDSI Evolution First In The Industry Awards and Patents
 Language
English Deutsche

 
 Important Updates
Our main
phone number is:
888-OpenCNC.

 
 Latest News
See our excess inventory sale!.

OpenCNC 6.6 is now available! View the new datasheet.

Upgrading from an ISA to PCI motherboard? Check this FAQ.
 

http://www.mdsi2.com/mdsi2_rss.xml - MDSI RSS Feed

Hardware - DC Output Module

Features Touch Screen PC Keyboards Digital I/O Pendants Interface Boards  

Part Number:  ACC10051

DC Output Module   Western Reserve DC Output Module WRC-1781-OB5S

$11.00 US

Contact MDSI if you require additional information about this product.


Input
Nominal input voltage: 5 V dc
Min. input volt. @ pin 3: 2.5 V dc
Max. input volt. @ pin 3: 7.5 V dc
Must turn off voltage: 1 V dc
Typical input current: 10 mA dc
Maximum input current: 27 mA dc
Nominal input resistance: 240 ohm
 
Output
Nominal line voltage: 24 V dc
Maximum line voltage: 60 V dc
Minimum line voltage: 3 V dc
Max peak off-state voltage: 60 V dc
Max off-state leakage current: 1.0 mA dc
Maximum on-state current 3A dc
Minimum on-state current: 10 mA dc
Maximum 1 second surge: 5 A peak
Peak on-state voltage @ 25 C: 1.5 V peak
Maximum turn-on time: 50 µ sec
Nominal turn-on time: 10 µ sec
Maximum turn-off time: 100 µ sec
Derating per above 60 C 33 mA

General Specifications
Operating temperature range: -30 to 80° C
Storage temperature range: -40 to 100° C
Capacitance input to output 8 pF

Notes:

  • Do not install or remove modules in live (electrically hot) circuits. High voltage may be present.
  • Output connections are non-polarized.
  • An externally located commutating diode must be installed across inductive loads.