|
|
|
 OpenCNC Versions and Windows Versions
This list shows OpenCNC Versions and what Windows or QNX versions work properly with them.
| OpenCNC Version | Windows NT | Windows 2000 | Windows XP |
| 6.6 | 4.0 SP6 | 2000 SP2 | XP SP2 | | 6.5 | 4.0 SP6 | 2000 SP2 | XP SP2 | | 6.4 | 4.0 SP6 | 2000 | XP SP1 | | 6.3 | 4.0 SP6 | 2000 SP2 | - | | 6.2 | 4.0 SP6 | 2000 SP2 | - | | 6.1 | 4.0 SP6 | 2000 SP2 | - | | 6.0 | 4.0 SP6 | - | - | | 5.1 | 4.0 SP5 | - | - | | 5.0 | 4.0 SP5 | - | - | | 4.0 | 4.0 SP4 | - | - | | 3.0 | 4.0 SP4 and QNX | | 2.0 | QNX |
|
|
| Hits: |
4446 |
| Rating: |
Rating:0 Votes:0 (Rating Scale: 1 = worst, 10 = best)
|
| Added on: |
7/5/2006 |
| Author/Source: |
n/a |
| Author's contact: |
www.mdsi2.com |
| Posted by: |
bruce rick |
| Comments: |
0 Comment(s) |
|
|
Other Articles by this Author
Back
|
|
|
|
Main Directory
